Photo

International / National Journals

A) First Author / Corresponding author

  • K.Jayasankar, Samata Samal and Sarama Bhattacharjee, Synthesis of Fluorite Ceria Based Solid Solutions from Mixed Rare Earth Carbonates, Ceramics International Vol.35 (2009) p 3103–3109.

  • K.Jayasankar, S. Mohapatra, S.K.Routray, J.L.Gumaste and P.S.Mukherjee, Thermal Plasma Processing for the Production of Pig Iron From Various Sources, High temperature materials and processes, 1-2, Vol. 28 (2009) p1-8

  • K. Jayasankar, Samata Samal and Sarama Bhattacharjee, Thermal plasma synthesis of rare earth based pigments, High Temperature Material Processes (An International Quarterly of High-Technology Plasma Processes), 3-4, Vol 13 (2009) p 285-298.

  • K. Jayasankar, A. Mandal, A. Pany and P.S. Mukherjee, Synthesis of Fe-TiC in-situ Composites by Plasma Smelting of Ilmenite, Materials & Manufacturing Processes, Vol. 26: 1330-1334,2011.

  • K. Jayasankar, P.K. Ray, A. K. Chaubey, A. Padhi, B. K. Satapathy, and P.S. Mukherjee, Production of pig iron from red mud waste fines using thermal plasma technology, International Journal of Minerals, Materials and Metallurgy, 19 (8), 2012.

  • Abhishek Pandey, Haribabu Palneedi, K. Jayasankar, P. Parida, M. Debata, B.K. Mishra, S. Saroja, Microstructural Characterization of Oxide Dispersion Strengthened Ferritic Steel Powder, Journal of Nuclear Materials, 437, 29–36, (2013)

  • Abhishek Pandey, K. Jayasankar, P. Parida, M. Debata, B.K. Mishra, S. Saroja, Optimization of milling parameters, processing and characterization of nano-crystalline oxide dispersion strengthened ferritic steel, Powder Technology, Volume 262, ( 2014),Pages 162-169.

  • A. Kumar , K. Jayasankar , M. Debata , A. Mandal, Mechanical alloying and properties of immiscible Cu-20 wt.% Mo alloy, Journal of Alloys and Compounds 647 (2015) 1040 1047.

  • K. Jayasankar, Abhishek Pandey, B. K. Mishra and Siddhartha Das , Creep Behaviour of Nano-Y2O3 Dispersed Ferritic Steel, Transactions of Powder Metallurgy of India, Vol. 39, December 2013, Pages 14-19, ISSN 0377-9416.

  • K. Jayasankar, Abhishek Pandey, B. K. Mishra and Siddhartha Das, Mixed fuel synthesis of Y2O3 nanopowder and their applications as dispersoid in ODS steel, Advanced Powder Technology, Vol 26, Issue 5, September 2015, Pages 1306–1313

  • K. Jayasankar, Abhishek Pandey, B. K. Mishra and Siddhartha Das, In-Situ Formation of Complex Oxide Precipitates During Processing of Oxide Dispersion Strengthened Ferritic Steels, Fusion Engineering and Design, Vol. 102 (2016) Pages 14–20.

  • K. Jayasankar, Abhishek Pandey, B. K. Mishra and Siddhartha Das, Evaluation of microstructural parameters of nanocrystalline Y2O3 by X-ray diffraction peak broadening analysis , Materials Chemistry and Physics 171, 195-200 (2016)- IF: 2.129.

  • G. Rajendra Kumar ,K. Jayasankar Sushanta K. Das , Tapan Dash , Ajit Dash, Bikash Kumar Jena, Barada Kanta Mishra , Shear-force-dominated Dual-Drive Planetary Ball milling for Scalable Production of Graphene and Its Electrocatalytic Application with Pd nanostructures, Royal Society of Chemistry (RSC) Advances., 6, 20067–20073 (2016)- IF: 3.84.

  • Sunil Kumar Pradhan, Jayasankar Kalidoss, , , Ranjan Barik, Bathula Sivaiah, Ajay Dhar, Shubhra Bajpai, Development of high density tungsten based scandate by spark plasma sintering for the application in microwave tube devices, International Journal of Refractory Metals and Hard Materials, http://dx.doi.org/10.1016/j.ijrmhm.2016.09.002, 2016.

  • Avanish Kumar, Sunil Kumar Pradhan, Kalidoss Jayasankar, Mayadhar Debata, Rajendra Kumar Sharma3, Animesh Mandal, Structural Investigations of Nanocrystalline Cu-Cr-Mo Alloy Prepared by High Energy Ball Milling, Journal of Electronic Materials , DOI: 10.1007/s11664-016-5125-x , 2016.

  • P. Rajput, V. Janakiram, K. Jayasankar, S. Angadi, B. Bhoi and P.S Mukherjee, Environmental Benign Process for Production of Molybdenum Metal from Sulphide Based Minerals, Journal of The Institution of Engineers (India): Series D, 2016 (Accepted)

  • B) Co-author:

  • Sarama Bhattacharjee, R.K.Galgali and K.Jayasankar, DC Thermal Plasma Reactor for Materials Processing, High temperature materials and processes, Vol: 37, Issue No. 3, Pg NO: 151-159, (2008).

  • A.K.Chaubey, S.Mohapatra, K.Jayasankar, S.K. Pradhan, B.Satpati, S.S.Sahay, B.K.Mishra & P.S.Mukherjee, Effect of cerium addition on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy, Transactions of the Indian Institute of Metals, 6, Vol. 62, (2009) p 539-543.

  • Ramu Yarra, P. Venkatachalam, S. Ramesh kumar, B. Ravishankar. K. Jayasankar and P. S. Mukherjee, Densification of Al-Y2O3 composite powder by equal channel angular pressing, Transactions of The Indian Institute of Metals, Vol. 63, Issue 5, (2010), pp 813-817.

  • J.L.Gumaste, K.Jayasankar, P.S.Mukherjee, S.K.Singh, B.K.Misra, Production Nitrogenized carbon nanotubes(CNTS) from calcined petroleum coke by ammonia cal argon arc plasma heating method, International Journal of Science and Technology, 1, pp. 17-22. (2011)

  • R. Sakthivel, K. Jayasankar, S.K. Das, B. Das, B.K. Mishra, Effect of planetary ball milling on phase transformation of a silica-rich iron ore, Powder Technology, Volume 208, Issue 3, 10 April 2011,Pages 747-751

  • Swagat S. Rath, K. Jayasankar, Bijoy K.Satapathy, Barada K. Mishra, Partha S. Mukherjee, Kinetics and Statistical Behaviour of Iron Recovery from Red Mud using Plasma arc Furnace, High Temperature Material Processes, Vol. 30 (2011).

  • Subramanian Ramesh Kumara,, Gudimetla , venkatachalam , Balasubramanian Ravisankar , K. Jayasankar, Microstructural and mechanical properties of Al 7075 alloy processed by Equal Channel Angular Pressing, Materials Science and Engineering A 533 (2012) 50– 54.

  • Swagat Rath, A. Pany, K. Jayasankar, Ajit K. Mitra. C. Satish kumar and P.S. Mukherjee, Statistical Modelling studies of iron recovery from red mud using thermal plasma, Plasma Science and Technology, Vol. 15, No.5, 459-464, ( 2013).

  • Pradyumna Kumar Parida, Arup Dasgupta, K. Jayasankar S. Saroja and M. Kamruddin, Structural studies of Y2O3 dispersoids during mechanical milling in a Fe-15 Y2O3 model ODS alloy, Journal of Nuclear Materials , 441 , 331-336, ( 2013)

  • R.Sakthivel, D.Bhattacharyya C. Eswaraiah, D. Das, K. Jayasankar, B. K. Mishra, Effect of milling on reduction behavior of blue dust, Journal of Alloys and Compounds 587, 677–680,2014.

  • A. Mandal, ,N.Chippa ,K.Jayasankar, P.S.Mukherjee , Effect of high magnesium content on microstructure of Al–7Si alloy, Materials Letters ,117, 168–170. (2014)

  • Diptipriya Sethi, Naresh Jada, Rohit Kumar , Sakthivel Ramasamy , Sony Pandey, Trupti Das, K. Jayasankar , Partha Sarathi Mukherjee , Ashish Tiwari, Synthesis and characterization of titania nanorods from ilmenite for photocatalytic annihilation of E. coli, Journal of Photochemistry and Photobiology B: Biology 140 (2014) 69–78.

  • K.G. Raghavendra, Arup Dasgupta, Pragna Bhaskar, K. Jayasankar, C.N. Athreya, Padmalochan Panda, S. Saroja, V. Subramanya Sarma, R. Ramaseshan, Synthesis and characterization of Fe-15 wt.% ZrO2nanocomposite powders by mechanical milling, Powder Technology, 287, (2016) 190–200.

  • Pradyumna Kumar Parida, Arup Dasgupta, K.G. Raghavendra, K. Jayasankar and S. Saroja, Structural Studies of Dispersoids in Fe–15 wt% Y2O3–5 wt% Ti Model ODS Alloys During Milling and Subsequent Annealing, Transactions of The Indian Institute of Metals, DOI 10.1007/s12666-016-0911-y, June 2016.

  • S. Kasimuthumaniyan, S. K. Singh, K.Jayasankar, K. Mohanta, A. Mandal, An alternate approach to synthesize TiC powder through thermal plasma processing of titania rich slag, Ceramics International , Volume 42, Issue 16, , Pages 18004-18011 (2016).

  • R.Saini, R.Khanna, R.K.Dutta, R.Cayumil..M.Ikram-Ul Haq, V.Agarwala .G.Ellamparuthy. K. Jayasankar. P.S.Mukherjee, V.Sahajwalla, A novel approach for reducing toxic emissions during high temperature processing of electronic waste, Waste Management, Volume 64, June 2017, Pages 182-189 (2017).

  • A. K. Singh, S. K. Shukla, M. S. Bisht, S. E. Rahaman, J. Kalidoss, M. Debata & R. K. Barik , Synthesis and characterization of nano-brazing alloy for thermionic dispenser cathode application, Journal of Electromagnetic Waves and Applications, https://doi.org/10.1080/09205071.2017.1357505, 2017.

  • M. Debata, T.S. Acharya , P. Sengupta , P.P. Acharya , S. Bajpai and K. Jayasankar, Effect of High Energy Ball Milling on Structure and Properties of 95W-3.5Ni-1.5Fe Heavy Alloys, International Journal of Refractory Metals and Hard Materials, doi: 10.1016/j.ijrmhm.2017.08.007, 2017.