Dr.Parijat Pallab Jana

Dr.Parijat Pallab Jana
Professional Experience
  • August 2021 - Till date: Scientist, Material Science and Technology Division CSIR-National Institute for Interdisciplinary Science and Technology Thiruvananthapuram
  • November 2020 - July 2021: Temporary Faculty, School of Advanced Materials, Green Energy and Sensor Systems, Indian Institute of Engineering Science and Technology, Shibpur
  • June 2020 - October 2020: Research Associate, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur
  • July 2014 - December 2014: Adhoc Faculty, Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal.
Publications

Publications

  1. Parijat P. Jana, Jayanta Das, “Precise estimation of glass transition and crystallization temperatures of Zr55Cu30Ni5Al10 metallic glass using step-scan modulated temperature differential scanning calorimeter”, Thermochimica Acta 660 (2018) 18-22. https://doi.org/10.1016/j.tca.2017.12.018
  2. Tapabrata Maity, Anushree Datta, Parijat P. Jana, Prashanth Konda Gokuldoss, Jürgen Eckert, Jayanta Das, “Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites”, Materials 11 (2018) 113 (1-9). https://doi.org/10.3390/ma11010113
  3. Parijat P. Jana, Abhilash Gunti, Jayanta Das, “Improvement of intrinsic plasticity and strength of Zr55Cu30Ni5Al10 metallic glass by tuning the glass transition temperature”, Materials Science and Engineering A 762 (2019) 138102 (1-7). https://doi.org/10.1016/j.msea.2019.138102
  4. Parijat P. Jana, Jayanta Das, “Accurate measurement of glass transition temperature of Cu47.5Zr47.5Al5 and Zr41.2Ti13.8Cu12.5Ni10Be22.5 using step-scan modulated differential scanning calorimeter”, Journal of Alloys and Compounds 800 (2019) 314-319. https://doi.org/10.1016/j.jallcom.2019.06.052
  5. Anushree Dutta, Parijat P. Jana, Jayanta Das, “Effect of cooling rate and composition on the microstructure and mechanical properties of (Ni0.92Zr0.08)100−x Alx (0≤ x≤ 4 at.%) ultrafine eutectic composites”, Journal of Materials Research 34 (2019) 1704-1713. https://doi.org/10.1557/jmr.2019.49
  6. K. S. Anand, Parijat P. Jana, D. Prabhu, Jayanta Das, “The effect of milling time on the evolution of nanostructure, thermal stability, and magnetocaloric properties of (Ni0.50Fe0.50)70.5B17.7Si7.8Ti4”, Journal of Alloys and Compounds 772 (2019) 157-163. https://doi.org/10.1016/j.jallcom.2018.09.074
  7. K. S. Anand, D. Goswami, Parijat P. Jana, Jayanta Das, “Correlating the lattice parameter and Curie temperature of γ-Ni in Fe-Ni-base alloys”, AIP Advances 9 (2019) 055126 (1-3). https://doi.org/10.1063/1.5097345
  8. Debottam Goswami, K.S. Anand, Parijat P. Jana, Sanjay K. Ghorai, Santanu Chattopadhyay, Jayanta Das, “Synthesis of a robust multifunctional composite with concurrent magnetocaloric effect and enhanced energy absorption capabilities through a tailored processing route”, Materials and Design 187 (2020) 108399 (1-10). https://doi.org/10.1016/j.matdes.2019.108399
  9. Barnasree Chanda, Gaurav Potnis, Parijat P. Jana, Jayanta Das, “A review on nano-/ultrafine advanced eutectic alloys”, Journal of Alloys and Compounds 827 (2020) 154226 (1-49). https://doi.org/10.1016/j.jallcom.2020.154226
  10. Barnasree Chanda, Parijat P. Jana, Jayanta Das, “A tool to predict the evolution of phase and Young’s modulus in high entropy alloys using artificial neural network”, Computational Materials Science 197 (2021) 110619 (1-13). https://doi.org/10.1016/j.commatsci.2021.110619
  11. Abhilash Gunti, Parijat P. Jana, Minha Lee, Jayanta Das, “Effect of cold rolling on the evolution of shear bands and nanoindentation hardness in Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass”, Nanomaterials 11 (2021) 1670 (1-18). https://doi.org/10.3390/nano11071670

Conference Proceedings

  1. Parijat P. Jana, Jayanta Das, “Effect of cold rolling on the structural change in Zr55Cu30Ni5Al10 bulk metallic glass” 54th National Metallurgist Day (NMD) Conference and 70th Annual Technical Meeting (ATM), 11-14 November 2016, IIT Kanpur, India. (Poster).
  2. Parijat P. Jana, Jayanta Das, “Measurement of glass transition temperature of metallic glasses using step-scan modulated temperature differential scanning calorimetry” The 25th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM), 2-6 July 2018, Rome, Italy (Oral).
  3. Parijat P. Jana, Jayanta Das, “Methodical assessment of glass transition temperature of metallic glasses using modulated temperature differential scanning calorimetry” 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM), 14-16 November 2018, Kolkata, India. (e-Poster).
  4. Parijat P. Jana, Jayanta Das, “Studies on the inhomogeneous deformation behavior of Zr55Cu30Ni5Al10 and Cu47.5Zr47.5Al5 bulk metallic glasses at room temperature” The 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM), 8-12 July 2019, Chennai, India (Poster).
Research Interest

Research Interest

  • Light metals and alloys; Non-equilibrium processing; Additive manufacturing; Thermo-analytical behaviours of bulk metallic glasses; High-entropy alloys; Magnetocaloric alloys; Metastable alloys
Profile
  • Ph. D.; Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, India
  • M. Tech.; Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, India
  • B. E.; Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Shibpur (Formerly Bengal Engineering and Science University, Shibpur)