Dr.Parijat Pallab Jana

Dr.Parijat Pallab Jana
Professional Experience
  • August 2021 - Till date: Scientist, Material Science and Technology Division CSIR-National Institute for Interdisciplinary Science and Technology Thiruvananthapuram
  • November 2020 - July 2021: Temporary Faculty, School of Advanced Materials, Green Energy and Sensor Systems, Indian Institute of Engineering Science and Technology, Shibpur
  • June 2020 - October 2020: Research Associate, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur
  • July 2014 - December 2014: Adhoc Faculty, Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal.
Publications

Publications

  1. Gaurav Potnis, Parijat P. Jana, Jayanta Das, Twinning and precipitation strengthening in low stacking fault energy CoCr1.3FeNi0.7MnNbx (x = 0.3, 0.367, 0.45) eutectic high entropy alloys upon cold forging and annealing, Materials Science and Engineering A 925 (2025) 147881. https://doi.org/10.1016/j.msea.2025.147881
  2. Aslam Hossain, T. Gopika, Anaswara Anil, B.I. Bijimol, M.S. Meera, Parijat P. Jana, S. Sameera A.V. Soldatov, S.M.A. Shibli, The effect of double perovskite decoration in NiP composite coating for efficient electrocatalytic hydrogen evolution, International Journal of Hydrogen Energy 80 (2024) 612-621. https://doi.org/10.1016/j.ijhydene.2024.07.173
  3. Shankha S. Basu, Parijat P. Jana, Manojit Ghosh, A new insight into the phase stability in high entropy alloys, Materials Today Communications 37 (2023) 107394 (1-4). https://doi.org/10.1016/j.mtcomm.2023.107394
  4. Debottam Goswami, Parijat P. Jana, Gaurav Potnis, Partha Kumbhakar, Debabrata Ganguly, Santanu Chattopadhyay, Jayanta Das, Enhancement of the thermal conductivity of a near room temperature magnetocaloric composite using graphene-like hybrid nanosheets derived from organic waste, Materialia 32 (2023) 101915 (1-7). https://doi.org/10.1016/j.mtla.2023.101915
  5. Parijat P. Jana, K. S. Anand, Barnasree Chanda, J. Arout Chelvane, Jayanta Das, Evolution of microstructure, magneto-structural transformation, and magnetocaloric effect in (Fe72-0.9xNi8-0.1xCo8)Zr7B4Cu1Gax (0 ≤ x ≤ 6 at.%) alloys, Materials Science and Engineering B 287 (2023) 116121 (1-9). https://doi.org/10.1016/j.mseb.2022.116121
  6. Parijat P. Jana, Jürgen Eckert, Jayanta Das, Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses, Thermochimica Acta 706 (2021) 179071 (1-8). https://doi.org/10.1016/j.tca.2021.179071
  7. Abhilash Gunti, Parijat P. Jana, Minha Lee, Jayanta Das, Effect of cold rolling on the evolution of shear bands and nanoindentation hardness in Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass, Nanomaterials 11 (2021) 1670 (1-18). https://doi.org/10.3390/nano11071670
  8. Barnasree Chanda, Parijat P. Jana, Jayanta Das, A tool to predict the evolution of phase and Young’s modulus in high entropy alloys using artificial neural network, Computational Materials Science 197 (2021) 110619 (1-13). https://doi.org/10.1016/j.commatsci.2021.110619
  9. Barnasree Chanda, Gaurav Potnis, Parijat P. Jana, Jayanta Das, A review on nano-/ultrafine advanced eutectic alloys, Journal of Alloys and Compounds 827 (2020) 154226 (1-49). https://doi.org/10.1016/j.jallcom.2020.154226
  10. Debottam Goswami, K.S. Anand, Parijat P. Jana, Sanjay K. Ghorai, Santanu Chattopadhyay, Jayanta Das, Synthesis of a robust multifunctional composite with concurrent magnetocaloric effect and enhanced energy absorption capabilities through a tailored processing route, Materials and Design 187 (2020) 108399 (1-10). https://doi.org/10.1016/j.matdes.2019.108399
  11. K. S. Anand, D. Goswami, Parijat P. Jana, Jayanta Das, Correlating the lattice parameter and Curie temperature of γ-Ni in Fe-Ni-base alloys, AIP Advances 9 (2019) 055126 (1-3). https://doi.org/10.1063/1.5097345
  12. K. S. Anand, Parijat P. Jana, D. Prabhu, Jayanta Das, The effect of milling time on the evolution of nanostructure, thermal stability, and magnetocaloric properties of (Ni0.50Fe0.50)70.5B17.7Si7.8Ti4, Journal of Alloys and Compounds 772 (2019) 157-163. https://doi.org/10.1016/j.jallcom.2018.09.074
  13. Anushree Dutta, Parijat P. Jana, Jayanta Das, Effect of cooling rate and composition on the microstructure and mechanical properties of (Ni0.92Zr0.08)100−x Alx (0≤ x≤ 4 at.%) ultrafine eutectic composites, Journal of Materials Research 34 (2019) 1704-1713. https://doi.org/10.1557/jmr.2019.49
  14. Parijat P. Jana, Jayanta Das, Accurate measurement of glass transition temperature of Cu47.5Zr47.5Al5 and Zr41.2Ti13.8Cu12.5Ni10Be22.5 using step-scan modulated differential scanning calorimeter, Journal of Alloys and Compounds 800 (2019) 314-319. https://doi.org/10.1016/j.jallcom.2019.06.052
  15. Parijat P. Jana, Abhilash Gunti, Jayanta Das, Improvement of intrinsic plasticity and strength of Zr55Cu30Ni5Al10 metallic glass by tuning the glass transition temperature, Materials Science and Engineering A 762 (2019) 138102 (1-7). https://doi.org/10.1016/j.msea.2019.138102
  16. Tapabrata Maity, Anushree Datta, Parijat P. Jana, Prashanth K. Gokuldoss, Jürgen Eckert, Jayanta Das, Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites, Materials 11 (2018) 113 (1-9). https://doi.org/10.3390/ma11010113
  17. Parijat P. Jana, Jayanta Das, Precise estimation of glass transition and crystallization temperatures of Zr55Cu30Ni5Al10 metallic glass using step-scan modulated temperature differential scanning calorimeter, Thermochimica Acta 660 (2018) 18-22. https://doi.org/10.1016/j.tca.2017.12.018

Conferences and Invited Talks

  1. S. P. Sibi, Muhammed Naseef, Parijat P. Jana, Sustainable aluminium alloy development by recycling automotive scraps, International Conference on Mining, Minerals, Metals and Materials (IC4M 2025), 21st January 2025 to 25th January 2025, Bhubaneswar, India (Oral).
  2. T.P.D. Rajan, Parijat P. Jana, A. Srinivasan, S.S. Sreejakumari, Sivakumar K., Justin Robert, Prospects of Rare Earth added Light Alloys and Composites for Strategic and Societal Sectors, Role of Rare Earth Metals, Alloys & Compounds for a Self-Reliant India (REMAC-2024), 11 December 2025-12th December 2025, Mumbai, India (Invited Talk).
  3. Justin Robert, Arun V. S., Sivakumar K., Hari Sanil, T.P.D. Rajan, Parijat P. Jana, Studies on microstructural and mechanical properties of squeeze cast Al-Mg-Mn-Sc-Zr alloy, International Symposium on "Transformational Technologies in Materials and Manufacturing" and 78th Annual Technical Meeting of the Indian Institute of Metals (IIM-ATM 2024), 20 November -22nd November 2024, Bengaluru, India (Poster).
  4. S. P. Sibi, Justin Robert, Sivakumar K., Kaustav Barat, Sumit Gahlyan, Gautam Wagle, T. P. D. Rajan, A. Srinivasan, S. S. Sreejakumari, Parijat P Jana, Studies on microstructural and mechanical properties of squeeze cast Al-Mg-Mn-Sc-Zr alloy, International Symposium on "Transformational Technologies in Materials and Manufacturing" and 78th Annual Technical Meeting of the Indian Institute of Metals (IIM-ATM 2024), 20 November -22nd November 2024, Bengaluru, India (Poster).
  5. Sivakumar K, Justin Robert, Hari Sanil, T.P.D. Rajan, Parijat P. Jana, Effect of Ce and La on structure and mechanical properties of squeeze cast aluminium alloys, International Symposium on "Transformational Technologies in Materials and Manufacturing" and 78th Annual Technical Meeting of the Indian Institute of Metals (IIM-ATM 2024), 20 November -22nd November 2024, Bengaluru, India (Poster).
  6. Sreedevi T. E., Justin Robert, Venkatesan J., Parijat P. Jana, K. Jayasankar, T. P. D. Rajan, Recovery of rare earths from aluminium industrial byproduct for the production of aluminium-rare earth alloys, International Conference on Science, Technology and Applications of Rare Earths (ICSTAR) - 2024, 21st August 2024 to 23rd August 2024, Kerala, India (Poster).
  7. Parijat P. Jana, K. Sivakumar, Justin Robert, T. P. D. Rajan, Development of Al-Mg-(Ce/La) alloys by direct metallothermic reduction of rare earth oxides, International Conference on Science, Technology and Applications of Rare Earths (ICSTAR) - 2024, 21st August 2024 to 23rd August 2024, Kerala, India (Oral).
  8. Justin Robert, Arun V. S., Sarath M., Sivakumar K., T.P.D. Rajan, Parijat P. Jana Effect of squeeze casting on the microstructural evolution and mechanical properties of Al-Mg-Mn-Sc alloy, International Conference on Science, Technology and Applications of Rare Earths (ICSTAR) - 2024, 21st August 2024 to 23rd August 2024, Kerala, India (Poster).
  9. Parijat P. Jana, Justin Robert, K. Sivakumar, T. P. D. Rajan, Studies on the metallothermic reduction of CeO2 and La2O3 for fabricating in-situ rare-earth-added aluminium alloys and composite, 36th National Convention of Metallurgical and Materials Engineers on the theme “Green composites, the new-generation sustainable composite materials: Specific features and applications” being organized by The West Bengal State Centre of The Institution of Engineers (India) under the aegis of Metallurgical & Materials Engineering Division Board (MMDB), IEI during 29th February 2024 to 1st March 2024 (Invited Talk).
  10. Parijat P. Jana, T. P. D. Rajan, Advances in materials science from fundamental discoveries to final products, International Conference on Perspective of Multi-functional Materials (ICPMM) organized by Research and PG Department of Physics, St. Alphonsa College of Arts and Science, Karinkal, Kanyakumari during 21-22 February 2024 (Keynote Talk).
  11. Parijat P. Jana, Justin Robert, T. P. D. Rajan, Production of Al-Ce master alloy by the metallothermic reduction of CeO2, Industry and R&D Theme Meeting on Rare Earth Metals, 16th January 2024, IREL (India) Limited, Bhopal, Madhya Pradesh, India (Invited Talk).
  12. Sreedevi.T.E., Justin Robert, Visakh Manoj, Parijat P. Jana, K Jayasankar, T. P. D. Rajan, Sustainable process for extraction of REE from red mud and potential method for REE- Al master alloy production, Rare Earths for Energy Security (REES 2023), Rare Earth Association of India and IIM Mumbai Chapter, 17th -18th August 2023, Goa, India (Poster).
  13. Parijat P. Jana, Hari Sanil, G. Vasudevan, M. Ravi, “Investigation on microstructure and thermo-mechanical properties of squeeze cast Al-Si Alloys” 76th Annual Technical Meeting (ATM) of the Indian Institute of Metals (IIM-ATM 2022) and the International Symposium on “Accelerated Materials Development and Additive Manufacturing: Scientific and Technological Perspectives (AMDAM)”, 13-16 November 2022, Hyderabad, India. (Poster).
  14. Parijat P. Jana, Jayanta Das, “Studies on the inhomogeneous deformation behavior of Zr55Cu30Ni5Al10 and Cu47.5Zr47.5Al5 bulk metallic glasses at room temperature” The 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM), 8-12 July 2019, Chennai, India (Poster).
  15. Parijat P. Jana, Jayanta Das, “Measurement of glass transition temperature of metallic glasses using step-scan modulated temperature differential scanning calorimetry” The 25th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM), 2-6 July 2018, Rome, Italy (Oral).
  16. Parijat P. Jana, Jayanta Das, “Methodical assessment of glass transition temperature of metallic glasses using modulated temperature differential scanning calorimetry” 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM), 14-16 November 2018, Kolkata, India. (e-Poster).
  17. Parijat P. Jana, Jayanta Das, “Effect of cold rolling on the structural change in Zr55Cu30Ni5Al10 bulk metallic glass” 54th National Metallurgist Day (NMD) Conference and 70th Annual Technical Meeting (ATM), 11-14 November 2016, IIT Kanpur, India. (Poster).
Research Interest

Research Interest

  • Light metals and alloys; Non-equilibrium processing; Additive manufacturing; Thermo-analytical behaviours of bulk metallic glasses; High-entropy alloys; Magnetocaloric alloys; Metastable alloys
Profile
  • Ph. D.; Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, India
  • M. Tech.; Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, India
  • B. E.; Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Shibpur (Formerly Bengal Engineering and Science University, Shibpur)